Low loader trailerMÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Low loader trailer
MÜLLER-MITTELTAL
14,4 to. Tiefl. , luftgefedert - Einschubrampen
Vaste prijs excl. btw
€ 32.950
(€ 39.210 bruto)
Bouwjaar
2025
Toestand
Nieuw
Locatie
Egestorf 

Basisgegevens
Prijs & locatie
Vaste prijs excl. btw
€ 32.950
(€ 39.210 bruto)
- Locatie van verkoper:
- Eichenstich 12, 21272 Egestorf, Duitsland

Bellen
Technische details
Afmetingen en gewicht
Totaalgewicht:
14.400 kg
Maximaal laadgewicht:
10.360 kg
Laadruimte lengte:
6.270 mm
Laadruimtebreedte:
2.470 mm
Laadruimtehoogte:
400 mm
Assen en wielen
Asconfiguratie:
2 assen
Details over het aanbod
- Advertentie-ID:
- A116-45-309
- Referentienummer:
- 6159
- Laatste aanpassing:
- voor het laatst op 11.06.2026
Omschrijving
* ETÜ-TA-ER 14.4:
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
Chedpfx Ajndpn Soqled
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
----Brakes:
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* Gigant axles
----Suspension:
* Air suspension with lifting and lowering function
----Drawbar / Flange Towing Eye:
* Drawbar height adjustable by 300 mm
* 40 mm flange towing eye
----Electrics / Lighting:
* Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required
* LED lighting system
* 15-pin power connector
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized, folding rear supports
* Plastic toolbox mounted on the front right exterior of the bulkhead
* Lateral underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Pre-installed fittings for later mounting of 20" container locks front and rear
* Bolted smooth sheet steel front wall
* Trapezoidal profile steel sheet side walls, foldable with drop side spring assist
* Bolted, hot-dip galvanized rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm
* Installation of 3 t folding lashing rings every 600 mm possible
* One 6.3 t lashing ring in each front and rear corner
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
Chedpfx Ajndpn Soqled
* 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis
----Painting:
* Hot-dip galvanized chassis, drawbar, front wall and rear wall
* Complete vehicle hot-dip galvanized
----Info:
* New vehicle with manufacturer's warranty
* Subject to alteration and prior sale
----Delivery Time:
* Available immediately ex Egestorf
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanbieder
Opmerking: Registreer gratis of log in, om alle informatie te bekijken.
Geregistreerd sinds: 2001
163 advertenties online
Aanvraag sturen
Telefoon & Fax
+49 40 33... weergeven
Misschien bent u ook geïnteresseerd in deze advertenties.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Egestorf
488 km
Aanhanger met werkplatform
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden









































































