Low loader trailerMÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Low loader trailer
MÜLLER-MITTELTAL
14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Vaste prijs excl. btw
€ 30.650
(€ 36.474 bruto)
Bouwjaar
2026
Toestand
Nieuw
Locatie
Egestorf 

Basisgegevens
Prijs & locatie
Vaste prijs excl. btw
€ 30.650
(€ 36.474 bruto)
- Locatie van verkoper:
- Eichenstich 12, 21272 Egestorf, Duitsland

Bellen
Technische details
Afmetingen en gewicht
Totaalgewicht:
14.400 kg
Maximaal laadgewicht:
10.750 kg
Laadruimte lengte:
7.000 mm
Laadruimtebreedte:
2.470 mm
Laadruimtehoogte:
400 mm
Assen en wielen
Asconfiguratie:
2 assen
Details over het aanbod
- Advertentie-ID:
- A186-10-241
- Referentienummer:
- 6180
- Laatste aanpassing:
- voor het laatst op 25.07.2026
Omschrijving
* ETÜ-TA-R 14.4:
Cjdpfx Aqov D Tcbjlohd
----Brakes:
* EBS braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange coupling:
* Drawbar with 300 mm height adjustment
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General attachments:
* Support winch at the front
* Outboard folding supports at the rear
* Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel
* Lateral impact protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* In front of the front panel and rear slope, provision for retrofitting container locking mechanisms for the transport of 20" containers
* Screwed front panel made of smooth sheet metal
* Steel sheet metal side walls - trapezoidal profile - foldable in the middle, divided 1x
* Steel rear wall can be slid in between the ramp brackets when not in use, inside in front of the front panel
* Rear crossbeams screwed on
----Load securing:
* Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing eyes possible every 600 mm
* In the corners, front and rear, 1 x 6.3-ton lashing point each
* In the front and end beam, various holes for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Painting:
* Drawbar, front panel, rear door, folding supports and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling and support winch painted in a black tone
* Painting of the side walls in RAL - 9010 pure white
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Immediately available from Egestorf
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Cjdpfx Aqov D Tcbjlohd
----Brakes:
* EBS braking system
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with equalizing unit
----Drawbar / Flange coupling:
* Drawbar with 300 mm height adjustment
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* 15-pin power connector
* LED lighting
----General attachments:
* Support winch at the front
* Outboard folding supports at the rear
* Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel
* Lateral impact protection
* Plastic quarter fenders
----Low-loader platform:
* 50 mm hardwood flooring
* In front of the front panel and rear slope, provision for retrofitting container locking mechanisms for the transport of 20" containers
* Screwed front panel made of smooth sheet metal
* Steel sheet metal side walls - trapezoidal profile - foldable in the middle, divided 1x
* Steel rear wall can be slid in between the ramp brackets when not in use, inside in front of the front panel
* Rear crossbeams screwed on
----Load securing:
* Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing eyes possible every 600 mm
* In the corners, front and rear, 1 x 6.3-ton lashing point each
* In the front and end beam, various holes for 1.2-ton lashing options
* Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm chassis
----Wheelbase:
* Wheelbase 1,140
----Painting:
* Drawbar, front panel, rear door, folding supports and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling and support winch painted in a black tone
* Painting of the side walls in RAL - 9010 pure white
----Information:
* Reinforced and certified body according to EN 12642 XL incl. load securing certificate
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Immediately available from Egestorf
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanbieder
Opmerking: Registreer gratis of log in, om alle informatie te bekijken.
Geregistreerd sinds: 2001
163 advertenties online
Aanvraag sturen
Telefoon & Fax
+49 40 33... weergeven
Misschien bent u ook geïnteresseerd in deze advertenties.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Egestorf
488 km
Aanhanger met werkplatform
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden















































































