Low loader trailerMÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Rampen
Low loader trailer
MÜLLER-MITTELTAL
3 Seitenkip.- Strongw., 10 to Rampen
Vaste prijs excl. btw
€ 33.500
(€ 39.865 bruto)
Bouwjaar
2026
Toestand
Nieuw
Locatie
Egestorf 

Basisgegevens
Prijs & locatie
Vaste prijs excl. btw
€ 33.500
(€ 39.865 bruto)
- Locatie van verkoper:
- Eichenstich 12, 21272 Egestorf, Duitsland

Bellen
Technische details
Afmetingen en gewicht
Totaalgewicht:
14.400 kg
Maximaal laadgewicht:
10.660 kg
Laadruimte lengte:
5.000 mm
Laadruimtebreedte:
2.420 mm
Laadruimtehoogte:
600 mm
Assen en wielen
Asconfiguratie:
2 assen
Details over het aanbod
- Advertentie-ID:
- A207-53-282
- Referentienummer:
- 61571
- Laatste aanpassing:
- voor het laatst op 29.09.2026
Omschrijving
* KA-TA-R 14.4:
----Brakes:
Bodpfx Aqsx Hm Rceljww
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* 15-pin power connector
* LED rear lights 12/24 V
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation
----General components:
* Jost mechanical front support legs
* 2 mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm at the front, on the right side of the chassis
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping platform:
* Net hooks on each of the bearings of the central locking mechanism, as well as 2 on the front wall
* Steel pallet-sided 3-way tipping body with adjustable Strong side panels (continuous side walls with internal tube reinforcement at the top - without center rails - can be folded down with side panel spring-assisted lifters)
* Rear frame rails bolted
* Combination steel wing doors - rear wall, 2-wing, asymmetrical split - can be pivoted and locked at 270° - not foldable - as well as with additional pivoting frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open
* 4 mm sheet metal floor made of fine-grained steel
----Load securing:
* 1 x 5-ton lashing eye in each corner
* 4 x 3-ton lashing eyes on each side, recessed in the outer frame
----Chassis:
* Chassis made of fine-grained steel
----Ramps:
* Rear receiving rail for the loading ramps
* 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles
* Storage compartment below the loading area in the chassis for the ramps, lockable from the rear
----Tires:
* Tires 358/55 R 19.5
----Painting:
* Drawbar, underrun protection, rear frame, folding support legs at the rear hot-dip galvanized
* Axles, springs, air tanks and support legs painted in a black tone
* Painting of the side panels in a RAL color of your choice (but no special or metallic paint) - can be changed up to approx. 6 weeks before completion
----Information:
* Superstructure - reinforced - with load securing certificate
* Errors and prior sale subject to change
* Sample images
----Delivery time:
* Available for immediate delivery from week 47/2026
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
----Brakes:
Bodpfx Aqsx Hm Rceljww
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7-ton Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* 15-pin power connector
* LED rear lights 12/24 V
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation
----General components:
* Jost mechanical front support legs
* 2 mechanical folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm at the front, on the right side of the chassis
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping platform:
* Net hooks on each of the bearings of the central locking mechanism, as well as 2 on the front wall
* Steel pallet-sided 3-way tipping body with adjustable Strong side panels (continuous side walls with internal tube reinforcement at the top - without center rails - can be folded down with side panel spring-assisted lifters)
* Rear frame rails bolted
* Combination steel wing doors - rear wall, 2-wing, asymmetrical split - can be pivoted and locked at 270° - not foldable - as well as with additional pivoting frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open
* 4 mm sheet metal floor made of fine-grained steel
----Load securing:
* 1 x 5-ton lashing eye in each corner
* 4 x 3-ton lashing eyes on each side, recessed in the outer frame
----Chassis:
* Chassis made of fine-grained steel
----Ramps:
* Rear receiving rail for the loading ramps
* 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles
* Storage compartment below the loading area in the chassis for the ramps, lockable from the rear
----Tires:
* Tires 358/55 R 19.5
----Painting:
* Drawbar, underrun protection, rear frame, folding support legs at the rear hot-dip galvanized
* Axles, springs, air tanks and support legs painted in a black tone
* Painting of the side panels in a RAL color of your choice (but no special or metallic paint) - can be changed up to approx. 6 weeks before completion
----Information:
* Superstructure - reinforced - with load securing certificate
* Errors and prior sale subject to change
* Sample images
----Delivery time:
* Available for immediate delivery from week 47/2026
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanbieder
Opmerking: Registreer gratis of log in, om alle informatie te bekijken.
Geregistreerd sinds: 2001
165 advertenties online
Aanvraag sturen
Telefoon & Fax
+49 40 33... weergeven
Misschien bent u ook geïnteresseerd in deze advertenties.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Egestorf
487 km
Driezijdige kipperaanhanger
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
MÜLLER-MITTELTAL3 Seitenkip.- Strongw., 10 to Rampen
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden

















































